Check ink cartridges, Ink service capacity warning, Ink system failure – HP Photosmart Premium Fax C309 User Manual
Page 203
Cause: The product had a problem.
Ink service capacity warning
Solution: If you are going to move or transport the product after receiving this message, make sure you keep
it upright and do not tip it on its side to avoid ink leakage.
Printing can continue, but ink system behavior might change.
Cause: The product has nearly maximized the ink service capacity.
Ink system failure
Solution: Turn off the product, unplug the power cord, and wait 10 seconds. Then, plug the power cord back
in and turn on the product.
If you continue to receive this message, write down the error code provided in the message on the product
display, and then contact HP support. Go to:
If prompted, choose your country/region, and then click Contact HP for information on calling for technical
support.
Cause: The printhead or the ink delivery system failed and the product can no longer print.
Check ink cartridges
Try the following solutions to resolve the issue. Solutions are listed in order, with the most likely solution first. If the
first solution does not solve the problem, continue trying the remaining solutions until the issue is resolved.
•
Solution 1: Install all five ink cartridges
•
Solution 2: Make sure the ink cartridges are installed correctly
•
Solution 3: Contact HP support
Solution 1: Install all five ink cartridges
Solution: Install all five ink cartridges.
If all five of the ink cartridges are already installed, proceed to the next solution.
For more information, see:
•
Cause: One or more of the ink cartridges were not installed.
If this did not solve the issue, try the next solution.
Solution 2: Make sure the ink cartridges are installed correctly
Solution: Make sure all of the ink cartridges are properly installed. Refer to the following steps to resolve this
error.
To make sure the ink cartridges are properly installed
1.
Make sure the product is turned on.
2.
Open the ink cartridge access door by lifting from the front right of the product, until the door locks into place.
Errors
201
Solve a problem