HP Photosmart Premium Fax C309 - Manual (Page 7)

2 Finish setting up the HP Photosmart
• Add the HP Photosmart to a network
• Set up a Bluetooth connection
• Set up the HP Photosmart for faxing
Add the HP Photosmart to a network
• Wired (Ethernet) network
• Wireless with a router (infrastructure network)
• Wireless without a router (ad hoc connection)
Wired (Ethernet) network
Before you connect the HP Photosmart to a network, make sure you have all of the required materials.
❑ A functional Ethernet network that includes a router, switch, or hub with an Ethernet port.
❑ CAT-5 Ethernet cable.
Although standard Ethernet cables look similar to standard telephone cables, they are not interchangeable.
There is a different number of wires in each one, and each has a different connector. An Ethernet cable connector
(also called an RJ-45 connector) is wider and thicker and always has 8 contacts on the end. A phone connector
has between 2 and 6 contacts.
❑ A desktop computer or laptop on the same network.
NOTE: The HP Photosmart supports networks with automatic speed negotiation capable of 10 or 100 Mbps.
To connect the HP Photosmart to the network
1. Remove the yellow plug from the back of the HP Photosmart.
2. Connect the Ethernet cable to the Ethernet port on the back of the HP Photosmart.
Finish setting up the HP Photosmart 5
Finish
sett
ing u
p
t
h
e HP Ph
oto
sma
rt