HP XP Racks - Manual (Page 600)

F1=Help F3=Exit F5=Add F6=Sort F7=Backward F8=Forward
4. Press the F5=Add key.
The Edit Logical Path Definition panel is displayed.
5. Specify CU for Type.
6. For SHR, specify Y when sharing the target path with other logical path definitions, specify N
for not sharing the target path.
If you do not specify anything, N is assumed.
7. Specify s in the AC column on the Primary line.
Edit Logical Path Definition
Command ===>
2008/02/28 16:03:38
Path Set ID . . . : TESTPATH
Description . . . : TEST
Attributes
Type . . . . . . . . CU (DKC/CU)
SHR . . . . . . . . Y (Y/N)
Supported action: s(Select Storage System)
AC S/N Model IFType PathID CU SSID CCA
S Primary __
Secondary __
Supported action: e(Edit physical path)
AC Assigned Physical Path
Forward
Reverse
F1=Help F3=Exit F7=Backward F8=Forward F12=Cancel
8. Press the Enter key.
The serial numbers of the scanned storage system are displayed in the Select Storage System
panel.
9. Specify s in the AC column for the storage system serial number (14002).
Select Storage System Row 1 to 2 of 2
Command ===>
Scroll ===> PAGE
2008/02/28 16:04:17
Supported action: s(Select)
AC S/N Device Address Domain ID ---
S 14002 SF
14001 LA
******************************* Bottom of data ********************************
F1=Help F3=Exit F7=Backward F8=Forward F12=Cancel
10. Press the Enter key.
The screen display changes to the Select SSID panel.
11. Specify s in the AC column for the CU for which the inter-CU logical path is to be defined.
Select SSID Row 1 to 10 of 10
Command ===>
Scroll ===> PAGE
2008/02/28 16:45:12
600 Using the ISPF panels