HP Integrity NonStop H-Series - Manual (Page 34)

Configuring the LMM Server on the NonStop System
Library Media Manager Installation and User’s Guide— 529970-002
3 -2
Configuring the LMM Server on the NonStop System
Configuring the LMM Server on the NonStop
System
1. Type RUN CONFIG at the TACL prompt on the system where LMM is installed.
2. Type a password and press Enter.
Figure 3-1. RUN CONFIG
Note. The file TSIMMSP is created after the password is entered. If you ever forget your
password, purge this file and create a new password. A new TSIMMSP file will then be
created.