HP Integrity NonStop H-Series - Manual (Page 60)

Configuring the LMM Server on the NonStop System
Library Media Manager Installation and User’s Guide— 529970-002
3- 28
Running the Server Processes on the NonStop
System
Running the Server Processes on the NonStop System
Once LMM has been configured on the HP NonStop system, the TCP/IP process
name PARAM needs to be set and the process executed before connecting to the
robot using the GUI.
1. Create an obey file to run the LMM server as shown in Figure 3-27 .
2. Type OBEY STATUS to see if the LMM processes have started. Figure 3-28 shows
the files and processes that are running.
3. Press Enter.
Note. Use the appropriate home terminal process for your system. Server files and client files need to be run by
using SUPER.GROUP access.
Figure 3-27. OBEY_GO