HP IMC Branch Intelligent Management Software - Manual (Page 20)

2. Click a CPE name in the CPE list to display the page containing the CPE details, including:
•
CPE Details: Detailed information about the CPE in the system. Click Refresh in the right
action pane to view the latest information of the CPE
•
Modify CPE Name: Click Edit in the right of the CPE name to modify the CPE name.
•
Unrecovered Alarms: Shows the distribution of unrecovered alarms. Click an alarm level
to query the alarms of the level for the CPE on the all alarms page.
•
Recent 10 Unrecovered Alarms: Shows the 10 most recent unrecovered alarms. Click
corresponding Alarm Details to see them.
•
Configuration Management: Shows the CPE configuration information.
•
Shortcuts for Configuring and Operating the CPE: The actions include synchronization,
refreshing, deleting, and IP ping test. The configurations include modifying the CPE name,
modifying the CPE configuration, modifying the access parameters, data model,
WAN
DSL link, WAN IP connection, WAN PPP connection, remote reboot, and factory reset.
Modify the polling interval
Use this function to modify the polling interval.
1.
Select the Service tab, and click Resource > All CPEs in the BIMS navigation tree to display
the All CPEs list page.
2. Click a CPE name in the CPE list to display the page containing the CPE details.
3. Click Modify Polling Interval in the right configuration pane to display the page for modifying
the polling interval.
4. Configure the polling interval.
5. Click OK.
Modify the access parameters
Use this function to modify the access parameters.
1.
Select the Service tab, and click Resource > All CPEs in the BIMS navigation tree to display
the All CPEs list page.
2. Click a CPE name in the CPE list to display the page containing the CPE details.
3. Click Modify Access Parameters in the right configuration pane to display the page for
modifying the access parameters.
4. Enter the connection request username and connection request password.
5. Click OK.
View and modify CPE configuration
Use this function to view and modify the configuration of the connection between the selected CPE
and the ACS, such as the URL, username, and password. If you select a virtual CPE, you can view
and modify the OUI and serial ID of the CPE.
1.
Select the Service tab, and click Resource > All CPEs in the BIMS navigation tree to display
the All CPEs list page.
2. Click a CPE name in the CPE list to display the page containing the CPE details.
3. Click Modify CPE Configuration in the right configuration pane to display the page for modifying
the CPE configuration. If you selected a virtual CPE in the previous step, the Modify CPE
Configuration dialog box displays.
4. Modify the CPE configuration.
5. Click OK.
20 Resource management