Set message notification, Add/modify message notification – HP IMC Branch Intelligent Management Software User Manual
Page 58
3.
Enter the new rule name.
NOTE:
In an alarm forwarding rule, the logical relationship among the conditions is AND.
4.
Enter the destination port number.
5.
Select the applicable alarm levels.
NOTE:
If you select All Alarms, all types of alarms are forwarded. If you select Selected
Alarms, only the selected alarms are forwarded.
6.
Select the applicable CPEs.
NOTE:
If you select All CPEs, alarms of all the CPEs are forwarded. If you select Selected
CPEs, only the alarms of the selected CPEs are forwarded.
7.
Select the applicable alarms.
8.
Enter the time range on each day in the format of 12:23-23:23.
NOTE:
The system forwards only the alarms generated within the time ranges you specified.
For example, if you set 00:00–24:00 for a certain day, all alarms generated on the day are
forwarded.
9.
Click OK.
Set message notification
The message notification function enables the system to inform the maintainer of alarms (including
the CPE name, alarm name, alarm level, alarm time, and alarm cause) by sending mails.
1.
Click the Alarm tab, and then in the CPE Alarm navigation tree click Alarm Notification to
display the alarm notification page.
2.
The alarm forwarding rule list provides the following operations:
•
Click Add to display the Add Alarm Forwarding Rule page.
•
Click the status link to change the status (Enabled/Disabled) of a message notification.
•
Click
to display the Modify Message Notification page.
•
Click
to display the Copy Message Notification page.
•
Click
to delete the message notification.
•
Click Refresh to refresh the message notification list..
Add/Modify message notification
The message notification function enables the system to inform the maintainer of alarms (including
the CPE name, alarm name, alarm level, alarm time, and alarm cause) by sending messages.
NOTE:
To add a message notification, make sure that the
server is configured properly.
1.
Click the Alarm tab, and then in the CPE Alarm navigation tree click Alarm Notification to
display the alarm notification page.
2.
Click Add above the message notification list to enter the page for adding a message
notification rule, or click
of a message notification rule to enter the page for modifying the
message notification rule.
3.
Enter a rule name (for adding a message notification rule).
NOTE:
In a message notification rule, the logical relationship among the conditions is AND.
4.
Enter the destination telephone number.
58
CPE alarm management