HP IMC Branch Intelligent Management Software - Manual (Page 38)

3. Set attributes to specify how the task is executed after deployment.
NOTE: The task deploys multiple CPEs in parallel mode. When CPEs are being deployed,
you cannot process errors for any CPE, or arrange CPEs.
a. Enter the task name. By default, the task name is Task+current time.
b. Select One-off or Periodical as the task execution type. “One-off” tasks are executed
once.
c. Select Immediately, Scheduled, or Quickly as the task execution time.
NOTE: A “Periodical” task can be executed monthly, weekly, or daily.
If you select Immediately on a NAT CPE or a CPE that dynamically obtains an IP address
through DHCP, the task is executed as the “Quickly” type.
d. Enter the task description.
e. Click OK.
Deploy CPE software
The function allows you to select a software file in the CPE software library and deploy it to one
or more CPEs in batches.
1.
Click the Service tab, and then in the BIMS navigation tree click Configuration Management
> Deployment Guide to enter the Deployment Guide page, and then click the Deploy Software
link.
2. Click Select CPE Software, and in the dialog box that displays, select the software you want
to deploy.
3. Enter the task name. The default task name is Task+current time.
4. Select the execution time, which can be Immediately, Scheduled, and Quickly. “Quickly”
means that the task is executed when the NAT CPE initiates a session (the BIMS does not
actively connect to the CPE).
5. Enter the task description.
6. Click Select CPE, and in the dialog box that displays, select one or more CPEs.
7. Click OK to create a CPE software deployment task.
Auto Deploy CPE configuration
Use this function to create an automatic CPE configuration deployment task, which deploys the
specified configuration file or configuration segment to the CPE accessing BIMS for the first time.
You can create a task by CPE or CPE class.
NOTE: If you create a task by CPE, you can select only virtual CPEs, and the created task applies
to only the selected virtual CPEs. If you create a task by CPE class, the task applies to all CPEs of
that class. An automatic configuration deployment task without a CPE class specified applies to
all ungrouped CPEs. Only one such startup configuration deployment task can exist.
Create an automatic CPE configuration deployment task by CPE:
1. Click the Service tab, and then in the BIMS navigation tree click Configuration Management
> Deployment Guide to enter the Deployment Guide page.
2. Click By CPE in the Auto Deploy Configuration field to enter the Auto Deploy Configuration
page.
3. Select the folder and file name of the configuration template.
4. Select the file to be deployed.
5. Click Select CPE, and select one or more CPEs in the dialog box that displays.
38 Configuration management