HP IMC Branch Intelligent Management Software - Manual (Page 37)

1. Select configuration templates CPEs, and the deployment strategy.
NOTE: When restoring the CPE configuration, to completely replace the CPE configuration,
select the deployment strategy startup configuration and reboot the CPE; to add some real-time
configurations or modify some configurations, select the deployment strategy running
configuration, and the other configuration of the CPE will not be automatically cleared.
If you select a configuration template of the configuration file type, you can deploy the
configuration template as the startup configuration or running configuration. If you select a
configuration template of the configuration segment type, you can deploy the configuration
template as only the running configuration.
a. Enter the Deploy Configuration page in one of the following ways:
•
Click the Service tab, and then in the BIMS navigation tree click Configuration
Management > Deployment Guide to enter the Deployment Guide page, and click
the Deploy Configuration link.
•
Click the Service tab, and then in the BIMS navigation tree click Configuration
Templates > Deployment Guide to enter the Configuration Templates page. Click the
operation link of a configuration template in the template list, and select Deploy.
•
Select the Service tab, and then in the BIMS navigation tree click Resource > All CPEs
to enter the All CPEs list page. Click the operation link of a CPE in the CPE list, and
select Configuration Management from the menu to enter the CPE configuration
management page of the CPE. Click the Configuration Backup History tab, and click
the Recover link of the configuration file.
b. Select the folder and file name of the configuration template.
c. Select the file to be deployed, and select whether to update the baseline configuration.
d. Click Select CPE, and select one or multiple CPEs in the dialog box that displays.
e. Click Next.
2. Add and configure parameters to the configuration template, and then deploy the new
configuration template to the corresponding CPEs.
NOTE: Each selected CPE corresponds to a specific configuration file, which is a complete
configuration file with the added parameters.
If the parameter name in the configuration template is the same as the field parameter name
of the CPE additional information, the additional information values corresponding to that
field parameter name are used as the configuration template parameters by default.
If the selected configuration file does not have parameters, the configuration wizard proceeds
to Step 3 below.
The symbol ${} indicates the definition of a parameter in a configuration segment in the
non-TR-069 node format. For example, ${scheme name} indicates a parameter named
scheme name.
a. Enter a fixed value parameter and the parameter corresponding to the TR-069 node.
NOTE: Enter a value between 0 and 128 bytes.
b. To deploy multiple CPEs and configure the same parameters for them, select Apply the
Same Configuration Template to Selected CPEs, and click Next.
c. To deploy multiple CPEs and configure different parameters for them, do not select Apply
the Same Configuration Template to Selected CPEs. Instead, click Next to configure
parameters for each selected CPE.
d. After you configure the last of the selected CPEs, the configuration wizard proceeds to
Step 3.
Deployment guide 37