HP IMC Branch Intelligent Management Software - Manual (Page 39)

6. Click Next. If the selected configuration template contains parameters, the Configure Parameters
page displays. Configure these parameters and then click Next to enter the Set Task Attributes
page. Otherwise, the Set Task Attributes page displays.
NOTE: A configuration segment can only be deployed as the running configuration in a
deployment task.
7. Set the task attributes, and click OK.
Create an automatic CPE configuration deployment task by CPE class:
1. Click the Service tab, and then in the BIMS navigation tree click Configuration Management
> Deployment Guide to enter the Deployment Guide page.
2. Click By CPE Class in the Auto Deploy Configuration field to enter the Auto Deploy Configuration
page.
3. Select the folder and file name of the configuration template.
4. Enter the task name. The default task name is Task+current time.
5. Enter the task description.
6. Select the file to be deployed, which can be running configuration or startup configuration.
NOTE: In an automatic configuration deployment task that deploys a startup configuration,
a CPE or CPE class can appear only once; this rule does not apply to the automatic
configuration deployment task deploying running configurations.
7. Click Select Class, and select one or more classes of CPEs in the dialog box that displays.
NOTE: After you specify a CPE class, the task deploys the configuration template to the class
of CPEs. Otherwise, the task deploys the configuration template to the CPEs that do not belong
to any CPE class. When a CPE belongs to a class specified above accesses BIMS for the first
time, the system automatically deploys the corresponding configuration template to the CPE.
8. Click OK.
Auto Deploy CPE software
Use this function to create an automatic CPE software deployment task, which deploys the specified
software to the CPE accessing BIMS for the first time. You can create a task by CPE or CPE class.
If you create a task by CPE, you can select only virtual CPEs, and the created task applies to only
the selected virtual CPEs; if you create a task by CPE class, the task applies to all CPEs of that
class.
NOTE: A CPE can appear in only one automatic software deployment task.
Create an automatic software deployment task by CPE:
1. Click the Service tab, and then in the BIMS navigation tree click Configuration Management
> Deployment Guide to enter the Deployment Guide page.
2. Click By CPE Class in the Auto Deploy Software field to enter the Auto Deploy Software page.
3. Click Select, and select the software as needed in the dialog box that displays.
4. Enter the task name. The default task name is Task+current time.
5. Enter the task description.
6. Click Select CPE, and select one or more virtual CPEs in the dialog box that displays.
NOTE: A configuration segment can only be deployed as the running configuration in a
deployment task.
7. Click OK.
Deployment guide 39