HP IMC Branch Intelligent Management Software - Manual (Page 51)

NOTE: You cannot change the username of a CPE authentication user.
4. Confirm your configuration and click OK.
•
Delete CPE authentication user: Delete existing CPE authentication users. Click of a CPE
authentication user. A dialog box displays for your confirmation. Click OK to delete the user.
•
Query CPE authentication user: Query a CPE authentication user by username.
•
View task details: Views the detailed configuration of the backup task. You can click the
backup task name to view the details.
System settings
Use this function to configure the system settings for BIMS.
NOTE: Only a system administrator can configure the system settings.
The following parameters are used in managing system settings:
•
Web Manager Configuration: Set the port of HTTP or HTTPS which will open the CPE
Web-Based manager.
•
Status Polling Interval: The system reads the status of the specified CPE at the set interval.
•
Configuration Polling Interval: The system reads the configuration information of the specified
CPE at the set interval.
•
Periodic Inform Interval: Indicates whether the CPE periodically sends CPE information to the
ACS using the Inform method.
•
Connection Request Username: Username that the ACS uses for sending connection request
to the CPE.
•
Connection Request Password: Password that the ACS uses for sending connection request to
the CPE. The value is a null string rather than an actual value when being read from the CPE.
•
CPE Adding Policy: Set whether to add CPE automatically.
•
Common Password Status: Set the common password status, enabled or disabled.
•
Common Password: Set the common password.
•
ACS Log Level: Specifies the output level of the ACS operation log, which can be modified
dynamically.
•
Print ACS Packet: Specifies whether to output ACS packets to the ACS operation log, which
can be modified dynamically.
•
Print CPE Packet: Specifies whether to output CPE packets to the ACS operation log, which
can be modified dynamically.
1. Select the Service tab, and then in the BIMS navigation tree click System Configuration >
System Settings to enter the System Settings page.
2. Make proper settings, and click OK.
Option tool
Use this function to convert between DHCP Option 43 and ACS URL. Option 43 refers to the vendor
specific option. The DHCP server and DHCP client exchange vendor specific information through
Option 43. When a CPE serves as the DHCP client, it can obtain the ACS parameter through
Option 43.
1.
Select the Service tab, and then select System Configuration > Option Tool from the navigation
tree.
System settings 51