Smsc settings, Add/modify alarm definition – HP IMC Branch Intelligent Management Software User Manual
Page 60
SMSC settings
This function allows you to configure the short message service center (SMSC). The administrator
must make proper settings for the virtual port that connects the message sending device to the
SMSC server, baud rate, country code, and SMSC number.
1.
Click the System tab, and click the SMSC Settings link to enter the SMSC settings page.
2.
Select the serial port
3.
Select the baud rate
4.
Enter the country code
5.
Enter the SMSC number
6.
Click OK.
Add/Modify alarm definition
Use this function to add or modify an alarm definition.
1.
Click the Alarm tab, and then in the CPE Alarm navigation tree click Alarm Definition to display
the alarm definition page.
2.
Click Add to display the page for adding an alarm definition, or click
for an alarm definition
to display the page for modifying it.
3.
Enter an alarm name (for adding an alarm definition).
4.
Enter an alarm code (for adding an alarm definition).
5.
Select an alarm level (for adding or modifying a vendor-defined alarm).
6.
Enter the alarm description.
7.
Enter the syslog descriptor.
8.
Enter the syslog description.
9.
Enter the alarm cause.
10. Enter the suggestion to correct the problem triggering the alarm.
11. Enter the maintenance experience.
12. Click OK.
60
CPE alarm management