HP Officejet 6600 e-All-in-One Printer - H711a H711g - Manual (Page 95)

To align the printhead from the embedded web server (EWS)
1.
Load Letter, A4, or Legal unused plain white paper into the main input tray. For
more information, see Load standard-size media.
2. Open the EWS. For more information, see To open the embedded web server.
3. Click the Tools tab, and then click Print Quality Toolbox in the Utilities section.
4. Click Align Printhead and follow the onscreen instructions.
Solve paper-feed problems
TIP: You can visit the HP online support website at www.hp.com/go/customercare
for information and utilities that can help you correct many common printer
problems.
Media is not supported for the printer or tray
Use only media that is supported for the printer and the tray being used. For more
information, see Media specifications.
Media is not picked up from a tray
•
Make sure media is loaded in the tray. For more information, see Load media.
Fan the media before loading.
• Make sure the paper guides are set to the correct markings in the tray for the
media size you are loading. Also make sure the guides are snug, but not tight,
against the stack.
• Make sure media in the tray is not curled. Uncurl paper by bending it in the
opposite direction of the curl.
Media is not coming out correctly
•
Make sure the output tray extender is fully extended; otherwise, printed pages
may fall off the printer.
• Remove excess media from the output tray. There is a limit to the number of
sheets the tray can hold.
Solve paper-feed problems 91