HP OneView for VMware vCenter - Manual (Page 43)

Figure 21 Viewing HP Storage Array details
The following information is displayed for each array:
HP Storage Provisioned to Host
•
Volumes—Number of volumes presented to the selected host from the array
•
Used—Amount of storage used by the host from the array
•
Total—Total amount of storage presented to the selected host from the array
•
Free pool capacity—Amount of available storage in the selected array. The number reflects
the difference between configured storage and used storage.
◦ P9000 or XP—Amount of available storage in the P9000 or XP Thin Provisioning storage
pool for P9000 or XP array storage that is provisioned to this cluster
◦ P6000 EVA or P4000—Amount of available storage in P6000 EVA and P4000 array
storage pools provisioned to this cluster
•
% Savings—Amount of storage saved through the use of array-based Thin Provisioning
Storage Pool
•
Total pool size—Total size of the storage pool
•
Provisioned used on pool—Amount of provisioned space used on the storage pool
•
Provisioned free on pool—Amount of provisioned space free on the storage pool
•
Unallocated space on pool—Amount of space not provisioned or allocated on the storage
pool
Datastores
This section lists the datastores provisioned from the selected host to VMs. For each datastore,
move the cursor over the status bar to view storage information. See
Figure 22 (page 44) .
The following information is displayed for each datastore:
•
Virtual disks—Number of virtual disks on datastores provisioned from the selected host to VMs
•
Total—Amount of storage provisioned on the host as virtual disks (VMDKs or RDMs)
•
Used—Amount of storage used on the host as virtual disks (VMDKs or RDMs)
•
% Savings—Amount of storage saved through the use of VMware-based Thin Provisioning
Using the Storage Module for vCenter 43