HP OneView for VMware vCenter - Manual (Page 45)

Provisioned from Cluster to Virtual Machines
•
Current storage inventory—Number of datastores, RDMs, and unused volumes provisioned
to VMs
•
Cluster Provisioned Capacity—Total amount of storage available to the cluster, including HP
storage, local storage, and unmanaged disks
•
Cluster Used Capacity—Amount of storage used by the cluster
•
Cluster Available Capacity—Amount of unused storage available to the cluster
•
Datastores overprovisioned—The number of over-provisioned datastores
•
VMDK/RDM Provisioned—Amount of storage provisioned by the cluster as virtual disks (VMDKs
or RDMs)
•
VMDK/RDM Used—Amount of storage used by the cluster as virtual disks (VMDKs or RDMs)
HP Storage Arrays
This section lists the arrays that present disks to the selected cluster. For each array, move the cursor
over the status bar to view storage information. See
Figure 22 (page 44) .
The following information is displayed for each array:
•
Volumes—Number of volumes presented to the selected cluster from the array
•
Used—Amount of storage used by the cluster from the array.
•
Total—Total amount of storage presented to the selected cluster from the array
•
% Savings—Amount of storage saved through the use of array-based Thin Provisioning
•
Free pool capacity—Amount of available storage in the selected array. The number reflects
the difference between configured storage and used storage.
◦ P4000—Amount of available storage in P4000 array storage pools provisioned to this
cluster
◦ 3PAR—Storage available in 3PAR common provisioning group
◦ P6000 EVA—Amount of available storage in P6000 EVA array storage pools provisioned
to this cluster
◦ P9000 or XP—Amount of available storage in the P9000 or XP Thin Provisioning storage
pool for P9000 or XP array storage that is provisioned to this cluster
Datastores
This section lists the datastores provisioned from the selected host to VMs. For each datastore,
move the cursor over the status bar to view storage information. See
Figure 22 (page 44) .
The following information is displayed for each datastore:
•
Virtual disks—Number of virtual disks on datastores provisioned from the selected host to VMs
•
Total—Amount of storage provisioned on the host as virtual disks (VMDKs or RDMs)
•
Used—Amount of storage used on the host as virtual disks (VMDKs or RDMs)
•
% Savings—Amount of storage saved through the use of VMware Thin Provisioning
Using the Storage Module for vCenter 45