Binding margin is in the wrong place – HP Deskjet 6540 Color Inkjet Printer User Manual
Page 158
Option for automatic two-sided printing cannot be selected
Verify the following:
• The duplexer is attached to the printer, and the duplexer is
in Chooser.
• A supported paper size is selected in the
• A supported paper type is selected in the Paper Type/Quality panel of the
For a list of support paper types and sizes, see the
Only one side of the page prints when the two-sided printing option is
enabled
Verify the following:
• The photo paper is not curled, if you are printing on two-sided photo paper.
Photo paper should be flat before printing. See
for more information.
• The paper size that is selected in the
the duplexer.
• The paper type that is selected in the Paper Type/Quality panel is supported
If the paper type or size is not supported by the duplexer, you can print the
document by using the
manual two-sided printing feature
.
Binding margin is in the wrong place
You might have chosen an incorrect paper orientation.
1. Open the
dialog box.
2. Select the Layout panel.
3. Verify that the correct binding has been selected:
• The Book button is selected for binding along the side.
• The Tablet button is selected for binding along the top.
HP Deskjet 6500 series printers User's Guide
158