HP Deskjet 6540 Color Inkjet Printer - Manual (Page 174)

Binding margin is in the wrong place
You might have chosen an incorrect paper orientation.
1. Open the Print dialog box.
2. Select the Layout panel.
3. Verify that the correct binding has been selected:
• The Book button is selected for binding along the side.
• The Tablet button is selected for binding along the top.
Only one side of the page prints when the two-sided printing option is
enabled
Verify the following:
• The photo paper is not curled, if you are printing on two-sided photo paper.
Photo paper should be flat before printing. See storing and handling photo
paper for more information.
• The paper size that is selected in the Page Setup dialog box is supported by
the duplexer.
• The paper type that is selected in the Paper Type/Quality panel is supported
by the duplexer .
If the paper type or size is not supported by the duplexer, you can print the
document by using the manual two-sided printing feature .
Colors look faded
If the colors look faded, try printing the two-sided document by using the manual
two-sided printing instructions .
16.3.6 Auto Two-Sided Print Accessory with Small Paper Tray
specifications
Dimensions when attached to printer
219.3 mm (8.63 in) tall x 320.5 mm (12.62 in) wide x 142.1 mm (5.6 in) deep
Duplexing specifications
For duplexing specifications, including skew, media weight, and media sizes for
paper fed into the printer through the printer In tray, see the Automatic Two-Sided
Printing Accessory specifications .
HP Deskjet 6500 series printers User's Guide
174