HP Deskjet 6540 Color Inkjet Printer - Manual (Page 50)

Preparing to print
1. Verify that the printer is turned on.
2. Lift the Out tray, and then remove all of the paper from the In tray.
3. Slide the paper-width guide all the way to the left, and then pull out the paper-
length guide.
4. Verify that the photo paper is flat.
If the photo paper is not flat, see the photo paper storage instructions .
5. Place the photo paper in the In tray with the side to be printed on facing down.
If you are using a photo paper that has a tear-off tab, verify that the tab is
pointing away from the printer.
6. Slide the paper guides firmly against the paper.
Printing
1. Open the Page Setup dialog box, and then select the following settings:
• Paper Size: The appropriate borderless paper size
• Orientation: The appropriate orientation
2. Click OK.
3. Open the
Print dialog box.
4. Select the General panel, and in the Paper Source drop-down list, click Upper
Tray.
5. Select the Paper Type/Quality panel, and then select the following settings:
• Paper Type: Click Photo paper, and then click the appropriate photo paper
type
• Print Quality: Best or Maximum dpi
6. If you want to use them, set the HP digital photography options .
7. Select any other print settings that you want, and then click Print.
HP Deskjet 6500 series printers User's Guide
50