HP Deskjet 6540 Color Inkjet Printer - Manual (Page 93)

Preparing to print
1. Verify that the printer is turned on.
2. Raise the Out tray, and then remove all paper from the In tray.
3. Slide the paper-width guide all the way to the left, and then pull out the paper-
length guide.
4. Place the banner paper in the In tray so that the unattached edge is on top of
the paper stack and pointing toward the printer.
1. Unattached edge
5. Slide the paper-width guide firmly against the paper.
6. Lower the Out tray.
Do not unfold the Out-tray extension stop.
Printing
1. Open the Page Setup dialog box.
2. In the Paper Size drop-down list, click A4 Banner or US Letter Banner.
3. Click OK.
4. Open the
Print dialog box.
5. Select the General panel, and in the Paper Source drop-down list, click Upper
tray.
6. Select the Paper Type/Quality panel.
7. In the Paper Type drop-down list, click Automatic or Plain paper.
8. Select any other print settings that you want, and then click Print.
HP Deskjet 6500 series printers User's Guide
93