Asus TW300-E5/PI4 User Manual
Asus Computers
Advertising
Table of contents
Document Outline
- Contents
- Chapter 1: Product introduction
- Chapter 2: Hardware setup
- Chapter 3: Motherboard info
- Chapter 4: BIOS infomation
- 4.1 Managing and updating your BIOS
- 4.2 BIOS setup program
- 4.3 Main menu
- 4.4 Ai Tweaker menu
- 4.4.1 Ai Overclock Tuner [Auto]
- 4.4.2 CPU Ratio Control [Auto]
- 4.4.3 FSB Strap to North Bridge [Auto]
- 4.4.4 DRAM Frequency [Auto]
- 4.4.5 DRAM Command Rate [Auto]
- 4.4.6 DRAM CMD Skew on Channel A/B [Auto]
- 4.4.7 DRAM CLK Skew on Channel A/B [Auto]
- 4.4.8 DRAM Timing Control [Auto]
- 4.4.9 DRAM Static Read Control [Auto]
- 4.4.10 Ai Clock Twister [Auto]
- 4.4.11 Transaction Booster [Auto]
- 4.4.12 CPU Voltage [Auto]
- 4.4.13 CPU PLL Voltage [Auto]
- 4.4.14 FSB Termination Voltage [Auto]
- 4.4.15 DRAM Voltage [Auto]
- 4.4.16 North Bridge Voltage [Auto]
- 4.4.17 South Bridge Voltage [Auto]
- 4.4.18 Clock Over-Charging Voltage [Auto]
- 4.4.19 CPU Spread Spectrum [Auto]
- 4.4.20 PCIE Spread Spectrum [Auto]
- 4.5 Advanced menu
- 4.6 Power menu
- 4.7 Boot menu
- 4.8 Tools menu
- 4.9 Exit menu
- Chapter 5: RAID configuration
- 5.1 RAID configurations
- 5.2 Marvel® 88SE6145 RAID BIOS Configuration Utility
- 5.3 Intel® Matrix Storage Manager Option ROM Utility
- 5.3.1 Creating a RAID 0 set (Stripe)
- 5.3.2 Creating a RAID 1 set (Mirror)
- 5.3.3 Creating a RAID 10 set (Stripe + Mirror)
- 5.3.4 Creating a RAID 5 set (Parity)
- 5.3.5 Deleting a RAID set
- 5.3.6 Resetting disks to Non-RAID
- 5.3.7 Rebuilding the RAID
- 5.3.8 Exiting the Intel® Matrix Storage Manager
- 5.3.9 Setting the Boot array use MB BIOS Setup Utility
- 5.3.10 Global Array Manager
- Chapter 6: Driver installation
- Appendix: Reference information