Asus TW300-E5/PI4 - Manual (Page 150)

6-18 Chapter 6: Driver installation
Digital Output
The Realtek ® audio CODEC allows you to
connect an external audio output device
via the coaxial/digital S/PDIF port. You
can set your listening environment, set
the karaoke, or select pre-programmed
equalizer settings for your listening
pleasure.
To set the digital output options
1. From the Realtek HD Audio
Manager, click the Digital Output
tab.
2. Click Set Default Device to set the digital output port as the default audio
output device.
3. Click the Sound Effects sub-tab for options on changing the acoustic
environment and karaoke settings, or click the Default Format sub-tab for
options on changing the default audio output format.
4. Click to effect the Digital Output settings and exit.
Speakers
The Speakers tab allows you to configure
audio output settings using the analog
audio ports.
To set the speakers options
1. From the Realtek HD Audio
Manager, click the Speakers tab.
2. Click Set Default Device to set the
analog ports as the default audio
output device.
3. Click the Speaker Configuration
sub-tab for audio channel options and test.
4. Click the Sound Effects sub-tab for options on changing the acoustic
environment and karaoke settings.
5. Click the Room Correction sub-tab for individual speaker distance
adjustment.
6. Click the Default Format sub-tab for options on changing the default audio
output format.
7. Click to effect the Speakers settings and exit.