Asus TW300-E5/PI4 - Manual (Page 130)

5-20 Chapter 5: RAID configuration
5.3.8 Exiting the Intel ® Matrix Storage Manager
To exit the utility:
1. From the utility main menu, select 4. Exit, then press <Enter>.
This window appears.
Are you sure you want to exit? (Y/N):
[ CONFIRM EXIT ]
2. Press <Y> to exit or press <N> to return to the utility main menu.
5.3.9 Setting the Boot array use MB BIOS Setup Utility
1. When creating multi-raid via Intel(r) Matrix Storage Manager RAID, we would
like to assign one array to be the boot drive. The following shows as the
status of current arrays:
2. Re-boot the system and press <Del> to enter the Motherboard BIOS Setup
Utility during POST.
3. Go to [Boot] menu —> [Boot Device Priority]. Then, select the desired boot
array and use <+> or <-> key to change the boot device priority.
Boot Settings
Boot Device Priority
Boot Settings Configuration
Security
BIOS SETUP UTILITY
Main Advanced Power Boot Exit