Asus TW300-E5/PI4 - Manual (Page 128)

5-18 Chapter 5: RAID configuration
2. Press <Ctrl-I> to enter the Intel Matrix Storage Manager RAID configuration
utility after POST.
3. If there is available Non-RAID SATA Hard Disk, the utility will prompt
the windows for rebuilding the RAID. Press <Enter> to select the port of
destination disk for rebuilding or press <ESC> to exit
The size of destination disk for rebuilding should be the same or bigger as the
original hard disk.
4. After selecting, the volumes with Rebuild status will be rebuilt within the
operating system.
5. Exit the SATA RAID utility. When operating system is running, select the Intel
Matrix Storage Console from the Start Menu or click the Intel Matrix Storage
Manager tray icon.
6. From the View menu, select Advanced Mode to display a detailed view of
the Intel Matrix Storage Console.
7. From the Volumes view in the device pane, select the RAID volume. The
status will display Rebuilding % complete. After the rebuild is complete, the
status will display Normal.