2 memory configurations, Memory configurations -11 – Asus TW300-E5/PI4 User Manual

Page 31

Advertising
background image

2-11

ASUS TW300-E5/PI4

64-bit

Windows

®

XP Professional x64 Edition

Windows

®

Vista x64 Edition

• Due to chipset limitation, this motherboard can only support up to

8 GB on the operating systems listed below. You may install a maximum of

2 GB DIMMs on each slot.

• Some old-version DDR2-800 DIMMs may not match Intel

®

’s

On-Die-Termination (ODT) requirement and will automatically downgrade

to run at DDR2-667. If this happens, contact your memory vendor to check

the ODT value.

• Due to chipset limitation, DDR2-800 with CL=4 will be downgraded to run

at DDR2-667 by default setting. If you want to operate with lower latency,

adjust the memory timing manually.

2.4.2

Memory configurations

You may install 256 MB, 512 MB, 1 GB, and 2 GB ECC and non-ECC, unbuffered

DDR2 DIMMs into the DIMM sockets.

• You may install varying memory sizes in Channel A and Channel B. The

system maps the total size of the lower-sized channel for the dual-channel

configuration. Any excess memory from the higher-sized channel is then

mapped for single-channel operation.

• Always install DIMMs with the same CAS latency. For optimum

compatibility, it is recommended that you obtain memory modules from the

same vendor.

• If you install four 1GB memory modules, the system may only recognize

less than 3GB of total memory because of address space allocation for

other critical functions. This limitation appears on Windows

®

Vista 32-bit /

Windows

®

XP 32-bit operation systems since it does not support Physical

Address Extension (PAE) mode.

• If you install Windows

®

Vista 32-bit / Windows

®

XP 32-bit operation system,

a total memory of less than 3GB is recommended.

• This motherboard does not support memory modules made up of 128 Mb

chips or double sided x16 memory modules.

Advertising