Connecting a holland scientific 430 sensor – Ag Leader SMS Mobile Sensors Quick Start Guide User Manual
Page 19
Advertising
SMS Mobile Sensor Configuration and Logging Options
Revision 8/1/2013
© 2013 Ag Leader Technology, Inc All Rights Reserved
18
Connecting a Holland Scientific 430 Sensor to SMS Mobile
1.
Connect the Holland Scientific Sensor to the 9-pin end
of the cable to the 9-pin port on the Mesa, PC or
handheld device.
2.
Open the SMS Mobile Software and turn on the
Holland Scientific Sensor.
Photo courtesy of Holland Scientific
3.
Tap the Setup menu and then the Sensors icon.
4.
In the Available Sensor Configurations window tap Add.
5.
Select Holland Scientific 430 from the Sensor Model drop down menu.
6.
Choose the Operation you wish to record data from the 430 in.
Advertising