Ag Leader SMS Mobile Sensors Quick Start Guide User Manual
Page 34
Advertising
SMS Mobile Sensor Configuration and Logging Options
Revision 8/1/2013
© 2013 Ag Leader Technology, Inc All Rights Reserved
33
8.
Tap the Assign Attributes tab and assign any attribute that you wish to log with this
sensor by tapping on the column and then using the Assign Column button.
a.
Choose the Attribute Group, Attribute Name, Units, and how to handle data if
Multiple Samples are sent from the sensor to SMS Mobile.
9.
Tap OK.
10.
Select the Port and Connection Settings for the sensor.
a.
Input the serial port, baud rate, data bits, parity, and stop bits.
Advertising