Connecting an ag leader optrx sensor, Connecting an ag leader optrx sensor to sms mobile – Ag Leader SMS Mobile Sensors Quick Start Guide User Manual
Page 4
SMS Mobile Sensor Configuration and Logging Options
Revision 8/1/2013
© 2013 Ag Leader Technology, Inc All Rights Reserved
3
Connecting an Ag Leader OptRx Sensor to SMS Mobile
1.
Connect the OptRx Sensor (running firmware version 1.1 or
newer) to the 12 pin Deutsch cable and then connect the 9-pin
end of the cable to the 9-pin port on the Mesa, PC or handheld
device (Ag Leader Part Number: 4002339-10).
2.
Open the SMS Mobile Software and turn on the OptRx Sensor.
3.
Tap the Setup menu and then the Sensors icon.
4.
In the Available Sensor Configurations window tap Add.
5.
Select Ag Leader OptRx from the Sensor Model drop down menu.
6.
Choose the Operation you wish to record data from the OptRx in.
7.
Enter a Configuration Name so that you can recognize this sensor in the future when
displayed in the list of Available Sensor Configurations.