Ag Leader SMS Mobile Sensors Quick Start Guide - Manual (Page 27)

SMS Mobile Sensor Configuration and Logging Options
Revision 8/1/2013
© 2013 Ag Leader Technology, Inc All Rights Reserved 26
Connecting a VERIS Surveyor/Instrument to SMS Mobile
[Back to Top]
1. Connect the Veris Monitor via serial port connection to the Mesa, PC
or handheld device.
2. Open the SMS Mobile Software.
3. Tap the Setup menu and then the Sensors icon.
Photo courtesy of
Veristech.com
4. In the Available Sensor Configurations window tap Add.
5. Select the Veris EC Surveyor/Instrument from the Sensor Model drop down menu.
6. Choose the Operation you wish to record data from the Veris Monitor in.
7. Enter a Configuration Name so that you can recognize this sensor in the future when
displayed in the list of Available Sensor Configurations.