Ag Leader SMS Mobile Sensors Quick Start Guide User Manual
Page 37
Advertising
SMS Mobile Sensor Configuration and Logging Options
Revision 8/1/2013
© 2013 Ag Leader Technology, Inc All Rights Reserved
36
3.
Tap on the Sensors tab and select the desired sensor. Tap OK.
4.
When you begin logging data, if the sensor was setup as Continuous Logging your
values will automatically be recorded. If the sensor was setup as Trigger Logging each
time you take a reading the value will be added to the logged data in SMS Mobile.
To display tooltips while logging data with a sensor so that the values you are
recording are displayed in the lower left hand corner of the SMS Mobile Software
follow the steps below:
1.
In the operation window go to the Map menu and select Tooltips.
Advertising