Ag Leader SMS Mobile Sensors Quick Start Guide - Manual (Page 9)

SMS Mobile Sensor Configuration and Logging Options
Revision 8/1/2013
© 2013 Ag Leader Technology, Inc All Rights Reserved 8
10. Tap Test Sensor.
a. Tap OK after turning on the Dualem Sensor. (The arrow on the end of the
sensor MUST be pointing up and all wires connected. Newer sensors will say
“DUALEM” instead of displaying the arrow. The text must be in the upright and
readable position).
b. Once testing is complete you should receive a message indicating that
messages have been received and that it is connected.
c. Tap OK.
11. Select the Attributes you wish to log from the sensor by placing a check mark in the
box next to their name. Tap OK when finished.