Connecting a minolta 502 spad meter, Connecting a minolta 502 spad meter to sms mobile – Ag Leader SMS Mobile Sensors Quick Start Guide User Manual
Page 23
SMS Mobile Sensor Configuration and Logging Options
Revision 8/1/2013
© 2013 Ag Leader Technology, Inc All Rights Reserved
22
Connecting a Minolta 502 Spad Meter to SMS Mobile
1.
Turn the SPAD meter on. The word ‘CAL” should be shown
on the screen. Connect the SPAD Meter to the 9-pin port on
the Mesa, PC or handheld device.
2.
Open the SMS Mobile Software.
3.
Tap the Setup menu and then the Sensors icon.
Photo courtesy of Spectrum
Technologies
4.
In the Available Sensor Configurations window tap Add.
5.
Select Minolta 502 SPAD Meter from the Sensor Model drop down menu.
6.
Choose the Operation you wish to record data from the SPAD Meter in.
7.
Enter a Configuration Name so that you can recognize this sensor in the future when
displayed in the list of Available Sensor Configurations.