EOTech MIPIM (AN/PEQ-16B) - Mini Integrated Pointer Illuminator Module User Manual
Page 31
2-5
2.3 MOUNTING CONFIGURATIONS / PROCEDURES -
Continued
Mounting Procedures
WARNING
Be sure the weapon is CLEAR and SAFE before
proceeding.
WARNING
Failure to properly secure the MIPIM to the rail
may lead to boresight repeatability and zeroing
issues. In extreme cases, the MIPIM could fall off
the rail, thereby exposing the operator or other
personnel to the MIPIM laser(s).
WARNING
The MIPIM may be placed at any position (forward
and aft) on the rail that is most convenient for the
operator. However, the entire length of the
mounting surface must be fully supported (in direct
contact) by the MIL-STD-1913 rail. If the MIPIM is
removed from the rail, the operator must make
note of the position at which it was boresighted or
zeroed, and return it to that same position in order
to ensure that zero is retained.