Figure 2-8 installation of the remote cable switch – EOTech MIPIM (AN/PEQ-16B) - Mini Integrated Pointer Illuminator Module User Manual
Page 44
Advertising
2-18
2.7 MODES OF OPERATION - Continued
CAUTION
When the Remote Cable Switch is plugged into
the remote jack, it automatically locks in place. To
remove it, pull back on the cable sleeve. Do not
remove the Remote Cable Switch by pulling on the
cable.
NOTE
The MIPIM comes with a jack plug installed in the
remote jack that must be removed and stored
before installing the Remote Cable Switch.
Figure 2-8 Installation of the Remote Cable Switch
Advertising