Aiwa XC-RW700 User Manual

Page 14

Advertising
background image

14

ENGLISH

DISC DUBBING

1 Load a blank or non-finalized CD-R/RW disc

on the record tray.

After TOC and OPC process, total number of tracks
and total time of all tracks will be displayed. "CD-R" or
"CD-RW" will also light depending on the disc in the
tray.

2 Press SPEED repeatedly to select dubbing

speed.

With each press of the button, the dubbing speed
changes as follows:

real-time

2x speed

4x speed

• The default dubbing speed is "real-time". The

recording takes as long as the actual running time of
the disc.

• When no speed indicator lights, the unit is set to real-

time recording.

• Note that the slower the record-dubbing speed, the

more tolerant the unit is of errors on the blank disc.
However, with most high-quality blank discs, the 2x
and 4x speeds should not present a problem.

3 Load the disc to be dubbed on the play tray.

After TOC process, total number of tracks and total time
of all tracks will be displayed and CD will light.

4 Press DUBBING , and wait until "01 00:00" is

displayed.

When "DISC FULL" is displayed
There is not enough space on the disc. Use another
disc.

5 Press

c

on the play deck or record deck.

Alternatively, press

c

on the remote control.

The dubbing will stop automatically when the source
disc has played through to the end. After the dubbing is
finished, "BUSY" and "UPDATE" will be displayed briefly.

To stop a dubbing operation manually

Press

s

on the play deck or record deck.

Alternatively, press

s

on the remote control.

To play in other machines

As with all recorded CD-R/RW discs, the disc must be
finalized before it can be played in other machines. See
page 18 for details.

Changing the order of tracks to be dubbed

Before starting the dubbing, program the tracks so that
they will be played in the desired order. See page 22 for
details.
• Dub containing programmed playback may only be made

by real-time or 2x speed. If you attempt to make a
programmed dubbing at 4x speed, the unit will
automatically select the 2x speed.

NOTE

• Recording levels may not be adjusted during digital

recordings.

• It is possible to listen to the disc while it is being dubbed

by selecting the appropriate input on your receiver,
preamp or processor.

• Do not use high volume levels when listening to high-

speed dubbings while they are in progress. It may cause
malfunction.

a

does not operate while a dubbing is in progress.

• Tracks will be added automatically to mirror the track

structure of the original disc.

• The total time indication of the recorded CD may vary

slightly from the original due to variations in the spin speed
of each drive. But no information has been lost in the
recording process.

• If the original disc being dubbed is a digital copy or if it

contains copy-prohibit signals, the unit will automatically
make a copy with real-time speed in analog mode
because of SCMS (see page 26).

4
2
5

2

3

1

4

5

5

Total time of all tracks

Total number of tracks

Total time of all tracks

Total number of tracks

"CD-R" lights

"CD" lights

Advertising