Dual play mode, Changing the time display mode – Aiwa XC-RW700 User Manual

Page 23

Advertising
background image

En

ENGLISH

23

DUAL PLAY MODE

• You may play a different disc in both decks at the same

time.

• The output of each deck will be sent to the appropriate

output jacks.

• You may use the output of one deck to feed your main

room system, while the second deck is used to feed a
remote room.

1 To select dual mode, press DUAL on the front

panel or remote control.

"DUAL" will light.

2 Select the deck you wish to listen by using

the input selectors on your receiver, preamp
or processor.

To return to single play mode

Press SINGLE on the remote control or DUAL on the
front panel.

NOTE

Pressing SINGLE on the remote control or DUAL on the
front panel while both decks are playing, will automatically
stop playback of the disc in the record deck while the disc
in the play deck continues to play.

CHANGING THE TIME
DISPLAY MODE

Various information about the contents of a CD can be
displayed on the information display.

In stop mode

The total number of tracks and the total time of all tracks
will be displayed.

During playback

Press appropriate DISPLAY on the front panel or press
CD/DISP or CD-R/RW/DISP on the remote control for the
desired deck repeatedly to change the time display as
follows:

1

1

CD/DISP
CD-R/RW/
DISP

DISPLAY

Total time of all tracks

Total number of tracks

Elapsed time of the
current track

Track number being
played

Remaining time of
the current track

Track number being
played

Total remaining time
on disc

Track number being
played

"DUAL" lights

Advertising