Aiwa XC-RW700 - Manual (Page 17)

En
ENGLISH
17
NUMBERING TRACKS
The track numbers may be added automatically (auto
mode) or manually (manual mode).
Auto mode
Auto mode can be used with either digital or analog
recording.
The auto mode will add track numbers automatically, in
one of two ways.
• When track data is present from a digital recording, it will
be carried over to the new copy disc.
• In the auto mode for recordings from an analog source
or a digital source with no track data, the track number
will be increased when the unit receives silence for 3
seconds. The unit will also go into the pause mode until
the input source resumes.
Manual mode
For digital or analog recordings, the track numbers may be
added at any time by pressing TRACK INCR on the remote
control.
To switch the numbering mode
Press AUTO/MANUAL repeatedly. When auto mode is
selected, "AUTO" lights.
AUTO/
MANUAL
TRACK INCR
"AUTO" lights