Aiwa XC-RW700 - Manual (Page 22)

22
ENGLISH
PROGRAMMED PLAYBACK
• You can program up to 20 tracks and play them in any
order.
• You can program tracks only in stop mode.
1 In stop mode, press CD/SEL or CD-R/RW/SEL
for the desired deck.
2 Press PRGM.
"PROG" will light and "00 00:00" will be displayed.
3 Press the numbered button to program a
track.
When selecting a two digit track number, the second
number must be entered within 10 seconds after the
first number pressed.
As each track is entered, the display will flash three
times, alternating between two displays.
4 Repeat step 3 to program other tracks.
• Tracks may also be added using r and t to
locate the track, and the PRGM to enter that track to
the programmed sequence.
5 Press c to start programmed playback.
The program will remain in the unit's memory until the
disc is removed or the unit is turned off.
To check the program
To scroll through a program list, press PRGM CHECK
repeatedly. Each press of the button will move through the
tracks that have been programmed.
To add a new track
1 Press PRGM CHECK repeatedly until "00" is
displayed.
2 Press a numbered button to add a new track.
To delete a track in the program
1 Press PRGM CHECK repeatedly to select the
track you wish to delete.
2 Press CLEAR.
The selected track will be deleted and programmed
tracks with higher numbers are decreased by one.
To change the program
1 Press PRGM CHECK repeatedly to select the
track you wish to change.
2 Press the numbered button.
To clear the program
Press PRGM while the program is playing.
"PROG" will go out on the information display.
In stop mode, simply open and close the disc tray.
Whenever a disc is removed or the unit is turned off, the
program is cleared.
PRGM CHECK
CLEAR
5
4
2,4
1
3
Program number Programed track
number
Total playing time of
programmed tracks Last track
programmed
"PROG" ights