Avaya IP Office 15-601082 - Manual (Page 26)

Wireless Installation and Configuration Guide
Wireless Installation and Configuration Guide Page 20
IP Office [15-601082] Issue [1] (1 June 2006)
QoS Configuration
If QoS Configuration is selected from the SVP-II Configuration screen. A screen similar to the following
is displayed:
Tags set packet priorities for QoS. Either DSCP or 802.1p tags may be used.

DSCP Tag - DSCP (Differentiated Services Code Point) is a QoS mechanism for setting relative
priorities. In the IP header, packets are tagged with a DSCP field for type of service.

Traffic Class

Administration - tags set the priority for Telnet, TFTP and other administrative traffic.
Administrative traffic can have the lowest priority because it does not require voice quality.

WT (In call)/WT (Standby) - in call traffic requires voice quality and may be set to a
higher priority than standby traffic.

RTP - audio traffic to the IP PBX. It requires voice quality.

PBX - traffic not audio to the PBX.

Inter-SVP2 - the information passing protocol the AVPP servers use to communicate with
each other.