Avaya IP Office 15-601082 User Manual

Page 70

Advertising
background image

Wireless Installation and Configuration Guide

Wireless Installation and Configuration Guide

Page 64

IP Office

[15-601082] Issue [1] (1 June 2006)

Erasing Memory

The wireless phone has
determined that a download
should occur and is erasing
the current software from
memory.

None. When the progress bar fills
the display line the erase
operation is complete.

Extension Error

Displayed for 5 seconds when
all of the IP Offices contacted
indicate that they do not
recognize the current
extension as valid.

The user will be asked to enter a
valid extension and password.

Extension in use

The phone is trying to register
with an extension that is
already registered on IP
Office.

See Avaya IP Office Integration
Factors.

Incompatible

The switch is rejecting the
software version presented by
the phone.

If this condition persists, contact
the system administrator.

Initializing...

The wireless phone is
performing power on
initialization.

None. This is information only.

Internal Err. ##

The wireless phone has
detected a fault from which it
cannot recover.

Record the error code so that it
can be reported. Turn the wireless
phone off and then on again. If the
error persists, try registering a
different wireless phone to the
phone port. If error still persists,
contact Avaya Technical Support
and report the error.

Low Battery, and
beep

Low battery

On call: the battery icon displays
and a soft beep will be heard
when the user is on the wireless
phone and the battery charge is
low. User has 15

30 minutes of

battery life left.

Not on call: The battery icon
displays whenever the battery
pack charge is low The message
Low Battery and a beep sound
indicate a critically low battery
charge when user is not on the
wireless phone. The wireless
phone will not work until the
battery pack is charged.

Multiple GW Res

More than one SVP server
has responded.

Caused by two or more wireless
phones sharing the same IP
address. Assign unique IP
addresses to each wireless
phone.

Network Busy

All access points are full or
busy.

Try calling again later.

Advertising