Avaya IP Office 15-601082 - Manual (Page 37)

Wireless Phone Installation
Wireless Installation and Configuration Guide Page 31
IP Office [15-601082] Issue [1] (1 June 2006)
Sample Installation and Configuration
A sample configuration set-up is available following the instructions below.
Note

Before you begin downloading software upgrades, you must create a Spectralink Login and
password.
If you have an IP Office unit, do the following to set-up the wireless phones:
1. To create a VoIP extension on IP Office, you must first download the firmware upgrades for the
phones and the AVPPs from the SpectraLink website: www.spectralink.com/softwareupdates
2. For the 10, 20 or 100 AVPP software, click Infrastructure. In the Product column, locate NetLink
SVP Server, and do the following:
a. Download the .EXE. For the 10 and 20 AVPP, download Netlink SVP Server.exe.
For the 100 AVPP, download Netlink SVP Server_01.exe.
b. Double-click the .EXE file and place the files in the same sub-directory as your
TFTP server is pointed to.
Note

10, 20 and 100 AVPPs will not operate together in a network. The network must consist of
all 10, all 20 or all 100 AVPPs.
For the wireless phone software, click Handsets. In the Product column, locate Netlink-
e340/h340/i640-Avaya and do the following:
a. Download the .EXE.
b. Double-click the .EXE file and place the files in the same sub-directory as your
TFTP server is pointed to.
3. Refer to the manufacturer
’
s documentation to configure the access point with the following
information:

Access Point IP Address

Individual Access Point Name

Frequency Channel

Security Key Information
4. Using a Cat. 5 Ethernet cable, connect the IP Office unit
’
s LAN port to the AVPP
’
s Network port.
5. To configure the AVPP, see AVPP Configuration.
6. Create a VoIP extension for each wireless phone.
7. Configure the wireless phone.