Avaya IP Office 15-601082 - Manual (Page 56)

Wireless Installation and Configuration Guide Page 50
IP Office [15-601082] Issue [1] (1 June 2006)
Testing a Wireless Phone
Verify proper registration and operation of each wireless phone by performing the following tests on each
wireless phone in an active wireless area.
1. To power on the wireless phone, press Power On/Start Call. A series of messages are
displayed as the wireless phone acquires the system. The wireless phone should display the user
extension. Any error messages should clear.
2. Press Power On/Start Call. The extension number should be replaced by information from the
IP Office unit and you should hear a dial tone. Place a call and listen to the audio quality. To end
the call, press Power Off/End Call.
3. Place a call to the wireless phone and verify ring, answer, clear transmit and clear receive audio.
4. Press Power On/Start Call.
5. To verify all programmed features on the wireless phone, press FCN and then press Power
Off/End Call when finished.
6. To verify the programmed line appearances, press LINE and then press Power Off/End Call
when finished.
7. Press Power Off/End Call. Any line indicators should turn off and the extension number display
will return.