Chapter 12 at commands, Using wireless ace, Figure 1. wireless ace: using at commands – Airlink Raven GPRS User Manual
Page 65: Chapter 12, Wireless ace: using at commands 57, At commands
Cingular GPRS Raven User Guide Version 2.01
57
CHAPTER 12
AT Commands
Just as with a Hayes compatible analog modem, the Raven parameters can all be
configured with AT commands. Wireless ACE and Wireless ACE Web (See “Wire-
less ACE and Wireless ACE Web” on page 15. and below) are a graphical interface
for the AT commands and it is highly recommended that you use one of them to
modify any parameters, however a terminal emulation application, such as Telnet,
can be used instead.
Using Wireless Ace
With Wireless ACE and Wireless ACE Web, you only need to find the command
listed and then enter the new value in the space provided. For those commands
which have specific parameters, the choices will be in a drop down menu.
FIGURE 1.
Wireless ACE: Using AT Commands