SIGMA ROX 5.0 - Manual (Page 12)

synchronizing the sensors
attaching the roX 5.0 and initial use
Page 12
roX 5.0
www.sigmasport.com roX 5.0
2.8.4 Resetting the synchronization
If a sensor does not display any values or the wrong sensor is synchronized,
the synchronization can be reset.
1 Press and hold the
Mode 1
button for three seconds.
‘sync. reset’ flashes on the display.
2 the zeros of the speed, cadence, and heart rate values flash again while
the respective sensors are being synchronized.
Mode 1