SIGMA ROX 5.0 - Manual (Page 30)

synchronizing the chest belt
running with the roX 5.0
Page 30
roX 5.0
www.sigmasport.com roX 5.0
6 Running with the ROX 5.0
the roX 5.0 can also be used as a running computer. a separate wrist strap
is provided to this end. when the roX 5.0 is attached to this wrist strap, all the
bike functions are hidden (but still remain saved and can be accessed on your
next bike trip). only the running-related functions remain. you can therefore use
your roX 5.0 with heart rate information for hiking, climbing, skiing, running, or
other types of sport.
6.1 Synchronizing the chest belt
Moisten the sensor areas and put on the chest belt.
attach the roX 5.0 to the wrist strap. the zeros for your current heart rate
flash. the roX 5.0 synchronizes with the chest belt in less than 10 seconds.
the current heart rate then appears on the display.
6.2 Starting the running time
the running time is started and stopped by pressing the middle function button
(
LAP
).
If the running time has started, the icon appears on the display.
6.3 Resetting the running time
1 Press and hold the
Reset
button for more than three seconds.
2 ‘tour data reset’ flashes on the display.
use this function to reset the following values to zero:
running time, intensity zones, avg. heart rate, max. heart rate, calories.
Lap
Reset