SIGMA ROX 5.0 - Manual (Page 23)

Page 23
setting the total running time
Basic settings roX 5.0
www.sigmasport.com roX 5.0
4.14 Setting the total running time
use this area to enter existing values (e.g. transferred from your old device).
new values are then added to these.
1 Press the
Mode 1
button to move to the total running time.
2 Press the Set button. the first digit for entering the hours value flashes.
3 Press
Mode 2
or
Reset
to increase or decrease the hours value respectively.
Press the
Mode 1
button to switch to the next digit. Press the
Set
button to
save the hours entry.
4 Press Mode 2 or Reset to increase or decrease the minutes value respectively.
5 Press the
Set
button to save your setting.
‘set oK’ appears on the display.
4.15 Setting the total calories for bike 1 or bike 2
use this area to enter existing values (e.g. transferred from your old device).
new values are then added to these.
1 Press the
Mode 1
button to switch to the total calories for bike 1 or bike 2.
2 Press the Set button. the first digit for entry flashes.
3 Press
Mode 2
or
Reset
to increase or decrease the value respectively.
4 Press the
Mode 1
button to switch to the next digit.
5 Press the Set button to save your setting.
‘set oK’ appears on the display.
Set Mode 1
Mode 2 Reset
Set Mode 1
Mode 2 Reset