SIGMA ROX 5.0 - Manual (Page 24)

setting the total running calories
Basic settings
Page 24
roX 5.0
www.sigmasport.com roX 5.0
4.16 Setting the total running calories
use this area to enter existing values (e.g. transferred from your old device).
new values are then added to these.
1 Press the
Mode 1
button to switch to the total running calories.
2 Press the Set button. the first digit for entry flashes.
3 Press
Mode 2
or
Reset
to increase or decrease the value respectively.
4 Press the
Mode 1
button to switch to the next digit.
5 Press the Set button to save your setting.
‘set oK’ appears on the display.
4.17 Activating the zone alarm
1 Press the Mode 1 button to switch to the zone alarm.
2 Press the
Set
button. the current setting flashes.
3 Press
Mode 2
or
Reset
to switch the zone alarm on or off respectively.
4 Press the Set button to save your setting.
‘set oK’ appears on the display.
Note
the zone alarm beeps during your trip if you have breached the limits of the set
training zone.
4.18 Setting the contrast
1 Press the
Mode 1
button to switch to the preset contrast.
2 Press the Set button. the display flashes.
3 Press
Mode 2
or
Reset
to increase or decrease the value respectively.
(1=weak/3=strong)
4 Press the
Set
button to save your setting.
‘set oK’ appears on the display.
Set Mode 1
Mode 2 Reset
Set Mode 1
Mode 2 Reset
Set Mode 1
Mode 2 Reset