SIGMA ROX 5.0 - Manual (Page 16)

setting the language
Basic settings
Page 16
roX 5.0
www.sigmasport.com roX 5.0
4 Basic settings
Press and hold the
Set
button for three seconds. ‘set oPen’ flashes on the
display. the preset language then appears.
If you are using the roX 5.0 for the first time and awakening it from deep sleep
mode, it will automatically jump to setting mode without you pressing and holding
the
Set
button.
Caution
the roX 5.0 can also be set during a trip. If doing so, always ensure that your
concentration remains focused on the road and the traffic!
4.1 Setting the language
1 Press the Mode 1 button to switch to the preset language.
2 Press the
Set
button. the display flashes.
3 Press
Mode 2
or
Reset
to select the desired language.
4 Press the Set button to save your setting.
‘set oK’ appears on the display.
4.2 Setting the unit
1 Press the
Mode 1
button to switch to the preset unit.
2 Press the Set button. the display flashes.
3 Press
Mode 2
or
Reset
to switch between km/h and mph.
4 Press the Set button to save your setting.
‘set oK’ appears on the display.
4.3 Setting the wheel size 1 and 2
1 Press the
Mode 1
button to switch to the preset wheel size
1 or wheel size 2.
2 Press the Set button. the first two digits for entry flash.
3 Press
Mode 2
or
Reset
to increase or decrease the value respectively.
4 Press the Mode 1 button to switch to the next digit.
5 Press the
Set
button to save your setting.
‘set oK’ appears on the display.
Set Mode 1
Mode 2 Reset
Set Mode 1
Mode 2 Reset
Set Mode 1
Mode 2 Reset
Set Mode 1
Mode 2 Reset