SIGMA ROX 5.0 - Manual (Page 28)

resetting tour data
general roX 5.0 functions
Page 28
roX 5.0
www.sigmasport.com roX 5.0
5.7 Resetting tour data
1 Press and hold the
Reset
button for more than three seconds.
2 ‘tour data reset’ flashes on the display.
use this function to reset the following values to zero:
trip distance, trip time, avg. speed, max. speed, avg. cadence, lap distance, lap
time, intensity zones, avg. heart rate, max. heart rate, calories.
5.8 Total values for bike 1 and bike 2
If you only ride one bike, only the total values for the first bike will be displayed.
If you also use a second bike, the total values are displayed under ‘bike 1’, ‘bike 2’
and ‘bike 1+2’.
5.9 Service interval
the service interval informs you once you have covered the distance before the
next bike inspection is due. the service interval can only be set by your specialist
retailer. once the preset distance has been reached ‘Inspection’ appears on the
display.
Press any button to clear this message.
5.10 Transport mode
If your bike is transported on a bike rack or in the car (if the roX 5.0 is clicked
into the bracket), the integrated movement sensor switches the roX 5.0 to
‘transport mode’. ‘transport’ appears on the display. Press any button to exit this
mode.
5.11 PC interface
the roX 5.0 is Pc-compatible. after purchasing the sIgMa data center
software and its docking station, you can quickly and effortlessly download your
current training session to your Pc. the roX 5.0 saves the current values every
10 seconds for trips lasting up to 25 hours. this trip is then graphically displayed
in the data center.
Note
the sIgMa data center software and docking station can be ordered from the
sIgMa sHoP at www.sigma-data-center.com.
Reset