Bondioli&Pavesi 399CECN02_G - Manual (Page 15)

15
ENG
DEFORMATION OF YOKES
EXCESSIVE TORQUE PEAK OR SHOCK LOAD
• Avoid overloading or engaging PTO when under load.
• Check the efficiency of the torque limiter.
BROKEN CROSS ARMS
EXCESSIVE TORQUE PEAKS OR SHOCK LOAD
• Avoid overloading or engaging PTO when under load.
• Check the efficiency of the torque limiter.
ACCELLERATED WEAR OF CROSS ARMS
EXCESSIVE LOAD
• Do not exceed the speed or power limits indicated in the instruction manual.
INSUFFICIENT LUBRICATION
• Follow instructions at point 22.
SEPARATION OF TELESCOPING TUBES
EXCESSIVE EXTENSION OF DRIVELINE
• Do not extend driveline to the point that the tubes separate.
• For stationary machinery, position the tractor so the telescoping tubes overlap
as illustrated in point 10.
TWISTING OR BENDING OF TELESCOPING TUBES
EXCESSIVE TORQUE PEAK OR SHOCK LOAD
• Avoid overloading or engaging PTO when under load
• Check the efficiency of the torque limiter.
• Check that driveline does not come into contact with tractor or implement
components during manoeuvres.
ACCELERATED WEAR OF TELESCOPING TUBES
INSUFFICIENT LUBRICATION
• Follow instructions from point 15 to point 22.
INSUFFICIENT TUBE OVERLAP
• Follow instructions at point 10.
ACCELERATED WEAR OF SHIELD BEARINGS
INSUFFICIENT LUBRICATION
• Follow instructions at point 22.
All the plastic parts of Bondioli & Pavesi drivelines are totally recyclable.
Protect the environment by disposing of used plastic parts properly at the
time of replacement.
47
48
49
50
51
52
53
46