AMETEK 1995A Micro-Set PLS - Manual (Page 31)

27 Installation and Maintenance Manual
Chapter 9: Specifications
9.4: DC Solid-State
(Single Pole, Normally Open)
9.5: 1995E Output Expansion Module
9.6: 1995-1446 Remote Circular Display
Maximum Load -2 Amp DC
Load Voltage Range -5 to 60V DC
Leakage Current -2 mA Maximum
“On” State Voltage Drop -1.5V Maximum
Surge Current -5A (1 Sec. Maximum)
Min. Operational Current -50 mA
Operate Time -0.5ms Maximum
Reset Time -2 ms Maximum
Operating Voltage -110/120V AC 50/60 Hz 100 mA
Temperature Range -32°F to 125°F (Operating)
0°F to 150°F (Storage)
Outputs -Same as Programmer
Operating Voltage -110/120V AC 50/60 Hz 150 mA
Temperature Range -32°F to 125°F (Operating)
0°F to 150°F (Storage)